• Natural Gas Compressor with Gas-liquid Mixed Transprocation for Wellhead YB1.2-45
Natural Gas Compressor with Gas-liquid Mixed Transprocation for Wellhead YB1.2-45

Natural Gas Compressor with Gas-liquid Mixed Transprocation for Wellhead YB1.2-45

In stock
YB1.2-45
Qidakon
Natural Gas Compressor
YB type gas-liquid mixing and pressurization device can reduce the flow pressure of gas well (gas well) by using compressor to increase the recovery rate of gas reservoir and achieve the purpose of tapping potential and increasing efficiency and protecting production and supply.
KONTAKTU NIN

Your email address will not be published. Required fields are marked with *

Priskribo

The well head pressure decreases slowly from high pressure to about 0.3~2 MPa after long-term mining. The natural gas (containing a small amount of water) from the gas well needs to be pressurized to more than 2 MPa and then treated centrally through the long-distance pipeline to the treatment station. High pressure should be injected when the well pressure is too low Days Natural gas increases formation pressure to increase wellhead production.


YB type gas-liquid mixing and pressurization device can reduce the flow pressure of gas well (gas well) by using compressor to increase the recovery rate of gas reservoir and achieve the purpose of tapping potential and increasing efficiency and protecting production and supply.


Compared With The Advantages Of Traditional Compressor Products

Table 1: Comparison of Traditional Pressurization Process and Drainage gas recovery and supercharging device  


Traditional Pressurization Process

Drainage gas recovery and supercharging device    

Component  

Heating furnace, pressure reducer, separation tank, compressor, storage tank,   trailer, etc

skid mounted mixed booster equipment

Investment costs

About 2 million

About 1 million

Construction cycle

One month

2-3   days

Energy consumption

Heating furnace energy consumption

Regulators waste energy

Compressor needs to press high intake pressure distributor

Compressor with minimum inlet pressure distributor

Failure rate

High failure rate

Hydraulic system, low failure rate

Compressor leakage

Natural leakage of fillers

Compressor shutdown

No leakage

Compressor shutdown without emptying


Parameter reference

Technical  specifications

Type of equipment

YB 0.42-74A

YB 1.0-60

YB 1.2-45

YB 1.2-66

YB 2.0-45

YB 1.25-90

YB 2.5-270

Structure form

skid mounted, first class compression, compression ratio <5

Air intake  pressure (MPa)

3-13

0.3-6

0.3-6

0.3-6

0-4.3

0.3-2

0.3-4

Exhaust  pressure (MPa)

15

1-9

1-6

1-6

1-4

1-4

1-4

Exhaust  (Nm3/d)

10000-60000

5000-60000

5000-40000

5000-40000

5000-40000

10000-30000

40000-60000

Liquid content in medium

90%

90%

90%

90%

90%

90%

90%

Motor power  (kW)

37+37

30+30

45(electric drive)

66(fuel drive)

45

45+45

90+90+90

Total power (KW)

82

72

52

66

52

97

300

Fuel tank (L)

1500

1000

400

400

400

1500

1500

Dimensions (m)

4.5×2.5×2.75

5×2.4×2.75

2.8×2.4×2.75

6×2.4×2.75

4.8×2.4×2.75

8×2.4×3

9.5×2.9×2.75

Customizable products according to customer's on-site requirements


Our products are 100% New & Original, in stock, low price promotion.

If you can’t find a suitable product model or require additional information, please contact us:  info@hkxytech.com



Kial Elekti Nin:

1. Vi povas akiri la perfektan materialon laŭ via postulo je la plej malgranda ebla prezo.

2. Ni ankaŭ proponas Reworks, FOB, CFR, CIF, kaj pordo al pordo livero prezoj. Ni sugestas vin fari traktadon por sendado, kiu estos sufiĉe ekonomia.

3. La materialoj, kiujn ni provizas, estas tute kontroleblaj, ĝuste de krudmateriala testatestilo ĝis la fina dimensia deklaro. (Raportoj montros laŭ postulo)

4. Ni garantias doni respondon ene de 24 horoj (kutime en la sama horo)

5. Vi povas akiri stokajn alternativojn, muelejajn liveraĵojn kun minimumigo de fabrikada tempo.

6. Ni estas plene dediĉitaj al niaj klientoj. Se ne eblos plenumi viajn postulojn post ekzamenado de ĉiuj elektoj, ni ne trompos vin farante falsajn promesojn, kiuj kreos bonajn klientajn rilatojn.


Kio okazas poste?

1. Retpoŝta konfirmo

Vi ricevos retpoŝton konfirmante, ke ni ricevis vian demandon.

2. Ekskluziva Venda Administranto

Unu el nia teamo kontaktos por konfirmi vian(j)n specifon kaj kondiĉon.

3. Via citaĵo

Vi ricevos ampleksan citaĵon adaptitan al viaj specifaj bezonoj.


2000+ Produktoj Vere Disponeblaj

100% Tute Nova Fabriko Sigelita - Originala

Tutmonde Sendado - Loĝistikaj partneroj UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express...

Garantio 12 Monatoj - Ĉiuj partoj novaj aŭ renovigitaj

Politiko pri sen ĝena reveno - Dediĉita klienthelpa teamo

Pago - PayPal, Kredit/debetkarto, aŭ Banko/Drata Transdono

Payment


HKXYTECH ne estas rajtigita distribuisto aŭ reprezentanto de la fabrikantoj prezentitaj en ĉi tiu retejo. Markaj nomoj kaj varmarkoj prezentitaj estas la posedaĵo de iliaj respektivaj posedantoj.

RELATAJ PRODUTOJ
Waste gas recovery unit YB0.1-4
Waste gas recovery unit YB0.1-4
This device is used in the natural gas gathering and transportation station, the waste gas and waste liquid discharged from the triethylene glycol dehydration and regeneration device can be recycled.
Hydraulic water transfer device YB0.05-4
Hydraulic water transfer device YB0.05-4
The produced water of oil and gas fields is pressurized to be transported to the water treatment plant for centralized treatment through pipelines to save transportation costs.
High Pressure Gas Injection Compressor YD0.1-55
High Pressure Gas Injection Compressor YD0.1-55
This product mainly composed of host cylinder, hydraulic workstation, control system components, pipeline valves, cooling system, base system, house body, etc. The compressor adopts single-cylinder one-stage compression, and the driving motor adopts a 55kW explosion-proof motor.
High Pressure Gas Injection Compressor DY2.2-500
High Pressure Gas Injection Compressor DY2.2-500
DY-2.2/500 combined gas injection compressor is specially developed for the working conditions of 50MPa gas injection and oil recovery in oil fields. It adopts the combination of mechanical reciprocating piston compressor

Serĉo de produktoj